Thursday, June 30, 2016

New Video on Ceramic Mat Heaters for Welding Heat Treating

Just a short video on Hotfoil EHS pre and post weld heat treating mat heaters (also known as pad heaters).

Friday, June 24, 2016

New Hotfoil EHS Welcome Video

We just introduced a new Hotfoil EHS Welcome video for our YouTube Channel. Check it out!

Monday, June 13, 2016

Ceramic Pre Weld and Post Weld Heaters Get The Heat to the Weldment Efficiently

Ceramic mat heaters
Ceramic mat heaters
The most important feature of a resistance heater is the ability to transfer the heat away from the resistance wire to the outer covering where it can be absorbed by the work piece. Even when accurately controlled, a poorly designed or poorly applied heater can cause the wire temperature to exceed the wires operational limits. Ceramic mat heaters, also known as ceramic pad heaters, are designed to produce more even and efficient heat transfer while maintaining maximum flexibility.

Design:

1) Sintered alumina oxide is formed into shapes and fired at precise temperatures to produce a ceramic insulator with a combination of high dielectric strength and efficient, fast heat transfer. This ceramic is also solid enough to withstand physical shock and resistance to oxidation and corrosion from a broad range of chemicals and atmospheres.

2) An accurately measured length of stranded nickel-chromium wire is precisely wound through the ceramic beads ensuring electrical isolation to produce a compact and flexible resistance heater. Suitable for operation at 2000 deg. F.

3) The resistance wire is then metallurgically bonded to a stranded nickel-copper wire to provide trouble free electrical continuity. The flexible stranded cold junction wire is connected to brass Twistlock connectors fitted with insulated sleeves. The cold junction extension leads are rated for 250 deg. C continuous temperature.

Ceramic mat heaters are efficient, time-tested, and proven heater technology in pre-weld and post weld heating, and are designed for the harsh realities of the welding environment.

For more information, contact:

Hotfoil-EHS, Inc.
2960 East State Street Ext.
Hamilton, NJ 08619
Phone # 609.588.0900
Fax # 609.588.8333
www.hotfoilehs.com