Hotfoil-EHS Attending the 2017 Global Petroleum Show in Calgary

Hotfoil-EHS is pleased to announce our products will be on display at the Global Petroleum Show on June 13 through 15, 2017 at the Stampede Park in Calgary, Canada.

Hofoil-EHS will in exhibiting as a guest of Stein Industries in London, Ontario. Stein will be exhibiting its high quality, custom designed, affordable induction heaters built to withstand harsh environments with wide applications.

This is a great opportunity to see major welding equipment vendors and new technologies being introduced. If you plan on being at the Global Petroleum Show, please stop by the Stein Industries at booth 4404.

The Global Petroleum Show provides direct access to the entire supply chain, innovative technologies, products & services and a massive number of educational seminars within the energy sector. Global Petroleum Show is an industry leading event, where more than 50,000 energy professionals from more than 90 countries converge for three days to strengthen business relationships, network, and do business with more than 1,000 exhibitors. During this pivotal, evolutionary period for the oil & gas sector, it’s never been more vital to re-connect with your global industry. From upstream to downstream, GPS provides a forum where business gets done.

Resistor Controlled Welding Machines

resistor controlled welding machines
Resistor controlled welding machines by AFTEK.
Resistor control has been used in multi-operating welding systems in shipyards and heavy construction for decades. In the heyday of nuclear power plant construction in the USA, nearly all were built using multiple-operator systems. From the thirties until about 1990, nearly all multiple-operator systems were the designed similarly. They used a large bulk power supply with “grids” connected by cables to form a system of distributed power. This system minimized the use of high voltage primary power, distributing 75-80 volts of secondary voltage instead.

As these systems grew in popularity, the concept of “packs” became popular. These packs provided 2, 4, 8, and 16 arcs in a steel rack, and all being connected to a separate power supply. A now defunct company named Big Four developed the concept of connecting multiple-operator systems in a loop arrangement, which resulted in greatly improved voltage stability. In 1990, this loop concept was further refined into integrated, modular welding packages. These newly designed systems provided an internal power supply sufficiently sized to provide power to all the arcs without any interference.

Loop systems are still being used today. They are viewed as a very economical welding alternative. For example, for a loop that needs twenty MIG arcs, it is possible to use (4) 500-amp power supplies connected to a single 500 MCM cable which circles the work space. Twenty control modules can be connected wherever needed on the closed loop of cable. A huge cost savings is realized in having to establish just four (4) primary connections instead of twenty (20).

Most conventional arc weld­ers use a transformer-like device called a reactor to control the "heat" of the welding arc. If you examine the Voltage/Amperage (V/A) curve for a con­ventional constant current (or constant voltage) welding power supply, you’ll see spikes. This is inherent in the design of conventional arc weld­ers. The V/A curve of a resistor controlled arc welder, on the other hand, is a straight line.

Resistor controlled arc systems provide more consistency of power - if you shorten the arc, thus lowering the arc voltage, the current will increase, and maintain virtually the same power (heat). If you lengthen the arc, you raise the voltage, but the power remains virtually constant. Why is this important? In any welding process, increasing the amperage increases penetration and increasing the voltage widens and flattens the head (and reduces penetration). With a resistor controlled arc, if you are welding along the seam and it closes, shortening the arc length will increase penetration. If the weld opens, lengthening the arc will lessen the penetration and widen the weld. This provides excellent control right in the electrode holder.

AFTek, a US manufacturer located in Chattanooga, TN and division of Hotfoil-EHS, is the sole remaining manufacturer of resistor controlled welding machines in the USA. Their resistance welders are an acknowledgement of the superior design Big Four developed years ago, while improving performance with edge-wound coils for better heat dissipation (thus better current control) and rotary switches for current selection, even under load.

New Product: The ISG Wireless Heat Treatment Controller

ISG heat treat controller
The ISG heat treat controller.
The ISG heat treatment controller is a panel-mounted controller which can easily be connected to thyristor, electrical contactor, or induction/inverter driven power sources. The controller has 2 analog outputs, 5 digital outputs, 2 analog inputs and 2 digital inputs.

The ISG is capable of controlling two measurement points and monitoring two measurement points. If more measuring points are required, up to 14 controllers can be daisy-chained to the same heating process via cables or wireless, while all being managed from a single computer. The ISG communicates with PC's via Zigbee radio or with an RS485 Serial port.

All routines or process plans are created with ISPort software. After the process is started, the routine and the process data is saved to the PC, and also to the controller's memory. This enables the controller to work independently should the connection between ISG and computer be lost. The ISG includes a convenient LED process display and additional process status and alarm LED's.

For more information on the ISG heat treatment controller, visit http://www.hotfoilehs.com or call 609.588.0900.

Custom Built Heat Treat Furnaces

Custom Built Heat Treat Furnaces
 15'x15'x60' Custom Furnaces
Hotfoil-EHS has extensive heat treating furnace design and fabrication experience. From small, low-throughput furnaces, to much larger high yield furnaces, to rail-driven furnaces, Hotfoil-EHS Design Engineers and Fabrication Shop have done it all.


 Heat Treat Furnace
Capable of handling 45,000 lbs.
Recently Hotfoil-EHS provided a customer with a heat treat furnace that is 15'x15'x60' that accommodates up to 45,000 pounds of material. Two, 5 million BTU burners heat the furnace to 1650 deg. F. The furnace travels on a track, back and forth, to accommodate two beds for greater production.

 Heat Treat Furnace
Rail system with (2) beds


For more information, visit http://www.hotfoilehs.com or call 609.588.0900.




A Better Choice in Heat Treatment Control Systems

ICE Star Heat Treatment Controllers
Ice Star, a Finnish company, engineers and manufactures heat treatment controllers for electric and gas furnaces, as well as for induction and resistive heating consoles. The company manufactures the most advanced metal heat treatment control system available today. Since 1984, they have been laser-focused on the development and advancement of industrial heat treatment controllers and software.

ICE Star Model ISG Heat Treatment Controllers
ICE Star
Model ISG
Heat Treatment Controller
Ice Star’s founder, Esa Santala, has decades of knowledge and experience in the heat treatment industry. He developed one of the first processor controlled multi-channel controllers and has since been building even more innovative products.

Ice Star controllers do not require a separate recorder. Ice Star controllers monitor all critical heat treatment variables - temperature, time, soak, upsets, diagrams, events, alarms etc. - and then provide extremely detailed records for each. Additionally, with ISPort software, you can monitor and control the heating processes directly from remote process displays and computers.

For more information about Ice Star in North America, visit Hotfoil-EHS or call 609.588.0900.

Hazardous Area Heater Control Systems for Coal Hoppers and Conveyors

Explosion proof control system
Explosion proof control system.
A major hazard in coal burning utilities is the transfer and storage of coal due to the presence of highly combustible coal dust. Mitigating the risks of combustible dusts eliminate the potential for dust explosions. It is critically important that any coal handling or coal storage facility have access to experienced application engineers who understand the specific requirements when handling coal and managing coal dust.

Electric heat is very often used to prevent coal freeze-ups in hoppers and conveyors. The most common electric heaters used are are exterior mounted panel heaters with carefully calculated watt densities to keep sheath temperatures low. A less preferred solution is the use of tubular heating elements that may have higher sheath temperatures. Tubular heaters are usually clamped or stud-welded to the exterior of the coal hopper or conveyor chute.  In either case, a control system must be employed to maintain operating temperatures and to safely limit temperatures below dust ignition temperatures.  Since the presence of coal dust in the atmosphere is considered normal, the use of explosion proof housings, conduit, and wiring practices is required for these control systems.

Explosion proof control system
Internal view.
Hotfoil, a New Jersey manufacturer of electric hopper and coal handling heating systems,  designs, engineers, and fabricates custom control systems specifically for these applications. 

With decades of experience in hopper, conveyor, and tank heating systems they provide their customers with a single-source, turn-key, electrical heating and control system solutions provider. All products are 100% quality tested prior to leaving the facility, and an added plus is that they provide on-site start-up assistance.