Showing posts with label custom power console. Show all posts
Showing posts with label custom power console. Show all posts

Custom Heat Treating Power Consoles Solve Many Potential Field Problems

Weather-proof, Stainless Steel Power Console
Weather-proof, Stainless Steel
Power Console
Standard heat treating power consoles available from a variety of manufacturers pretty much cover the same set of basic welding requirements. In many field situations however, there can be unusual circumstances such as difficult locations, available power sources, and environmental concerns. In these situations custom manufactured power consoles will provide welding outcomes with fewer operational problems, higher quality output, and greater safety.

Standard power consoles are available 3, 6, 9, 12, 18, 24 and 36 zone configuration (zones are many times referred to as "way" such as 3 way console, 6 way console, 9 way console, etc.) Each zone provides a point of control. The type of control can vary depending on the requirement of the weld. Some zones only need simple on-off or proportional control. Some welding jobs require more sophisticated temperature control profiles, thus requiring tight control with temperature vs. time ramping. Additionally, these more sophisticated control requirements may also need data logging or recording for quality compliance. In many situations custom cable sets are required to deliver the heater power and thermocouples to the workpiece. A power console manufacturer should have the experience and knowledge to consult, recommend, and install whatever zone control and cabling requirements your job needs.

Power console and custom cable sets
Power console and
custom cable sets
The operating environment is another important consideration for power console customization. Standard power console cabinets are usually made from a medium gage sheet metal and painted with an industrial grade rust-resistant paint. While fine for relatively dry and non-corrosive atmospheres, these are subject to quick deterioration when moved into areas where higher than normal concentrations of salt, chlorine, or other corrosive gasses exist. In these situations, careful consideration of exposed materials needs to be applied. Perhaps an all stainless steel design is needed? Or maybe special corrosion resistant paints or epoxy resins should be specified? Or maybe you only need a special color paint? Working with a power console manufacturer who has the flexibility in their manufacturing process and experience on the floor to provide these options is preferred.

Custom painted power console
Custom painted
power console
Finally, look for a power console manufacturer who can handle unusual power system requirements. A manufacturer who can adapt their systems to unique voltages and current requirements is a big plus. Look for an equipment company that has experience and production capabilities for a wide variety of transformers - single or dual- and can even supply custom built transformers.

And of course, always try and find equipment built right here in the USA.

For more information on ANY welding power console, contact:

Hotfoil-EHS
2960 East State Street Ext.
Hamilton, NJ 08619
Phone # 609.588.0900
Fax # 609.588.8333
www.hotfoilehs.com
Email: dap@hotfoilehs.com