Heat Treatment Controllers

ICE STAR manufactures fully digital heat precise and reliable treatment controllers. The ICE STAR controllers ISQ and ISC have from 6 to 12 controlling thermocouple's and up to 36 monitoring thermocouple's. More measurement points are available by connecting up to 14 controllers to each other wirelessly or with cables. The controllers are designed for any kind of heat treatment consoles and furnaces, and can be mounted inside or to front panel. Hotfoil-EHS is the North America representative for ICE STAR.

For more information, visit https://hotfoilehs/icestar or call 609.588.0900.

Common Types of Process Heating Systems and Equipment

External Electric Vessel Heater

In all process heating systems, energy is transferred to the material to be treated. Direct heating methods generate heat within the material (e.g., microwave, induction, or controlled exothermic reaction), whereas indirect methods transfer energy from a heat source to the material by conduction, convection, radiation, or a combination of these functions. In most processes, an enclosure is needed to isolate the heating process and the environment from each other. Functions of the enclosure include, but are not restricted to, the containment of radiation (e.g., microwave or infrared), the confinement of combustion gases and volatiles, the containment of the material itself, the control of the atmosphere surrounding the material, and combinations thereof.

Common industrial process heating systems fall in one of the following categories:

Large heat treated parts - still red-hot.

• Fuel-based process heating systems 
• Electric-based process heating systems 
• Steam-based process heating systems 
• Other process heating systems, including heat recovery, heat exchange systems, and fluid heating systems. 

The choice of the energy source depends on the availability, cost, and efficiency; and, in direct heating systems, the compatibility of the exhaust gases with the material to be heated. Hybrid systems use a combination of process heat systems by using different energy sources, or different heating methods with the same energy source.

Hotfoil-EHS are skilled experts in a wide variety of process heating systems design and fabrication. Contact them at 609-588-0900 or visit their website at http://www.hotfoilehs.com.

Large, Custom Heat Treat Furnace Fabrication

The video below demonstrates the erection of a 16' x 16' x 62' heat treat furnace built out of a 6x6 I-Beam skeletal structure with 11 gauge steel skin. Full size doors, two per end, will allow the furnace to heat loads using it's full volume. The furnace is equipped with eight 3-Million BTU burners, one at either end and 3 down each side, to circulate the air. Four dampers are included, two at each end. It will move back and forth on a rail system by (16) 10" crane wheels. A hydraulic system will act to lift the furnace 3" in the air off the hearth. This will allow the furnace to move freely and without damaging the insulation on the bottom seals. It will be controlled via a remote HMI screen with full SCADA capabilities.

For more information, visit http://www.hotfoilehs.com or call 609.588.0900.

Custom Mobile Heat Treating Trucks

Hotfoil-EHS designs and manufactures custom mobile rigs for remote heat treatment applications.

Custom designs include a variety of generator sizes, power consoles, interior workspaces and layouts, air conditioning, and easy access to all electrical components. For more information, visit http://www.hotfoilehs.com or call 609-588-0900.

Basics of Heat Treating

Interior view of heat treating furnace.

Heat treating refers to the heating and cooling operations performed on metal work-pieces to change their mechanical properties, their metallurgical structure, or their residual stress state.

Heat treating includes stress-relief treating, normalizing, annealing, austenitizing, hardening, quenching, tempering, martempering, austempering, and cold treating. Annealing, as an example, involves heating a metallic material to, and holding it at, a suitable temperature, followed by furnace cooling at an appropriate rate. Steel castings may be annealed to facilitate cold working or machining, to improve mechanical or electrical properties, or to promote dimensional stability.  Steel vessels, girders, pipes, and structures are heat treated prior to, and after welding to improve weld quality and strength.

Gas fired furnace used for heat treating.

Heat treating is performed in conventional furnaces, salt baths, or fluidized-bed furnaces. The basic conventional furnace consists of an insulated chamber with an external reinforced steel shell, a heating system for the chamber, and one or more access doors to the heated chamber.

Heating systems are direct fired or indirect heated. With direct-fired furnace equipment, work being processed is directly exposed to the products of combustion, generally referred to as flue products. Gas- and oil-fired furnaces are the most common types of heat treating equipment. Indirect heating is performed in electrically heated furnaces and radiant-tube-heated furnaces with gas-fired tubes, oil-fired tubes, or electrically heated tubes.

Industrial Process Heating: Electric and Fuel Based

Electric heater used on industrial hopper throat.

Process heating operations supply thermal energy to transform materials like metal, plastic, rubber, limestone (cement), glass, ceramics, and biomass into a wide variety of industrial and consumer products. Industrial heating processes include drying, heat treating, curing and forming, calcining, smelting, and other operations. Examples of process heating systems include furnaces, ovens, dryers, heaters, and kilns. Many of these systems are mature technologies used ubiquitously throughout manufacturing. Process heating is used to raise or maintain the temperature of substances involved in the manufacturing process, such as the use of heat to melt scrap in electric arc furnaces to make steel, to separate components of crude oil in petroleum refining, to dry paint in automobile manufacturing, or to process food for packaging.

Electricity-based process heating systems transform materials through direct and indirect processes. For example, electric current is applied directly to suitable materials to achieve direct resistance heating; alternatively, high-frequency energy can be inductively coupled to suitable materials to achieve indirect heating. Electricity-based process heating systems are used for heating, drying, curing, melting, and forming. Examples of electricity-based process heating technologies include electric arc furnace technology, infrared radiation, induction heating, radio frequency drying, laser heating, and microwave processing.

Gas burners for process heating.

Fuel-based process heating systems generate heat by combusting solid, liquid, or gaseous fuels, then transferring the heat directly or indirectly to the material. Hot combustion gases are either placed in direct contact with the material (i.e., direct heating via convection) or routed through radiant burner tubes or panels that rely on radiant heat transfer to keep the gases separate from the material (i.e., indirect heating). Examples of fuel-based process heating equipment include furnaces, ovens, kilns, melters, and high-temperature generators.

For information on any industrial heating application, contact Hotfoil-EHS at 609.588.0900 or visit http://www.hotfoilehs.com.

Pyrometers: Non-contact Temperature Measurement

Pyrometers come in handy for applications
such as heat treating.

Non-contact temperature measurement technology allows process operators and technicians to evaluate the temperature of process materials, machinery, or piping by measuring their electromagnetic radiation. Through inferential calculation and one or more radiation measurements, specialized instruments can determine temperature without contacting the subject material or surface. While the concept of non-contact measurement technology has existed for many years, more recent advancements in non-contact temperature sensing and the evolution of the pyrometer have allowed temperature measurement at a distance to become popular throughout industrial process operations.

Pyrometers can commonly concentrate light from an object onto a temperature sensing element. The sensed elevation in temperature is proportional to the infrared optical energy. Different instruments may have varying arrangements of concentrating lenses and sensors, but the operating principle is the same. The physical law behind the pyrometer's operating principle operates on an exponential mathematical basis that is non-linear. This results in one of the limitations of the pyrometer. A single pyrometer can only, with high accuracy, deliver a comparatively narrow range of target temperature. If the need for accuracy is reduced, the applicable temperature range widens. Innovative manufacturers have developed instruments with technology and features overcoming many of the limitations imposed by the physics, delivering instruments with accuracy and applicable temperature range usable in a wide array of applications.

One of the advantages to using a non-contact pyrometer is that their calibration is independent of the distance between the sensor and the object being evaluated. This phenomenon is due to the fact pyrometers have a field of view and can be filled with the target object in a way independent of distance. While the radiation emanating from the target object may be decreasing, the field of view of the pyrometer is measuring a greater portion of the object which is proportional to the amount of radiation being lost, essentially canceling out the distance and allowing the pyrometer to provide useful output. An example of a practical application of a pyrometer in industry would be its use to check the temperature of a ventilation system in the HVAC field.

Share your temperature measurement requirements and challenges with process instrumentation specialists. Their product application expertise will combine with your own process knowledge and experience to produce an effective solution.