Large, Custom Heat Treat Furnace Fabrication

The video below demonstrates the erection of a 16' x 16' x 62' heat treat furnace built out of a 6x6 I-Beam skeletal structure with 11 gauge steel skin. Full size doors, two per end, will allow the furnace to heat loads using it's full volume. The furnace is equipped with eight 3-Million BTU burners, one at either end and 3 down each side, to circulate the air. Four dampers are included, two at each end. It will move back and forth on a rail system by (16) 10" crane wheels. A hydraulic system will act to lift the furnace 3" in the air off the hearth. This will allow the furnace to move freely and without damaging the insulation on the bottom seals. It will be controlled via a remote HMI screen with full SCADA capabilities.

For more information, visit http://www.hotfoilehs.com or call 609.588.0900.

Custom Mobile Heat Treating Trucks

Hotfoil-EHS designs and manufactures custom mobile rigs for remote heat treatment applications.

Custom designs include a variety of generator sizes, power consoles, interior workspaces and layouts, air conditioning, and easy access to all electrical components. For more information, visit http://www.hotfoilehs.com or call 609-588-0900.

Basics of Heat Treating

Heat treating furnace
Interior view of heat treating furnace.
Heat treating refers to the heating and cooling operations performed on metal work-pieces to change their mechanical properties, their metallurgical structure, or their residual stress state.

Heat treating includes stress-relief treating, normalizing, annealing, austenitizing, hardening, quenching, tempering, martempering, austempering, and cold treating. Annealing, as an example, involves heating a metallic material to, and holding it at, a suitable temperature, followed by furnace cooling at an appropriate rate. Steel castings may be annealed to facilitate cold working or machining, to improve mechanical or electrical properties, or to promote dimensional stability.  Steel vessels, girders, pipes, and structures are heat treated prior to, and after welding to improve weld quality and strength.

Gas fired furnace used for heat treating.
Gas fired furnace used for heat treating.
Heat treating is performed in conventional furnaces, salt baths, or fluidized-bed furnaces. The basic conventional furnace consists of an insulated chamber with an external reinforced steel shell, a heating system for the chamber, and one or more access doors to the heated chamber.

Heating systems are direct fired or indirect heated. With direct-fired furnace equipment, work being processed is directly exposed to the products of combustion, generally referred to as flue products. Gas- and oil-fired furnaces are the most common types of heat treating equipment. Indirect heating is performed in electrically heated furnaces and radiant-tube-heated furnaces with gas-fired tubes, oil-fired tubes, or electrically heated tubes.

Industrial Process Heating: Electric and Fuel Based

Electric heater used on industrial hopper throat.
Electric heater used on industrial hopper throat.
Process heating operations supply thermal energy to transform materials like metal, plastic, rubber, limestone (cement), glass, ceramics, and biomass into a wide variety of industrial and consumer products. Industrial heating processes include drying, heat treating, curing and forming, calcining, smelting, and other operations. Examples of process heating systems include furnaces, ovens, dryers, heaters, and kilns. Many of these systems are mature technologies used ubiquitously throughout manufacturing. Process heating is used to raise or maintain the temperature of substances involved in the manufacturing process, such as the use of heat to melt scrap in electric arc furnaces to make steel, to separate components of crude oil in petroleum refining, to dry paint in automobile manufacturing, or to process food for packaging.

Electricity-based process heating systems transform materials through direct and indirect processes. For example, electric current is applied directly to suitable materials to achieve direct resistance heating; alternatively, high-frequency energy can be inductively coupled to suitable materials to achieve indirect heating. Electricity-based process heating systems are used for heating, drying, curing, melting, and forming. Examples of electricity-based process heating technologies include electric arc furnace technology, infrared radiation, induction heating, radio frequency drying, laser heating, and microwave processing.

Gas burners for process heating
Gas burners for process heating.
Fuel-based process heating systems generate heat by combusting solid, liquid, or gaseous fuels, then transferring the heat directly or indirectly to the material. Hot combustion gases are either placed in direct contact with the material (i.e., direct heating via convection) or routed through radiant burner tubes or panels that rely on radiant heat transfer to keep the gases separate from the material (i.e., indirect heating). Examples of fuel-based process heating equipment include furnaces, ovens, kilns, melters, and high-temperature generators.

For information on any industrial heating application, contact Hotfoil-EHS at 609.588.0900 or visit http://www.hotfoilehs.com.

Pyrometers: Non-contact Temperature Measurement

Red-hot metallic parts from furnace
Pyrometers come in handy for applications
such as heat treating.
Non-contact temperature measurement technology allows process operators and technicians to evaluate the temperature of process materials, machinery, or piping by measuring their electromagnetic radiation. Through inferential calculation and one or more radiation measurements, specialized instruments can determine temperature without contacting the subject material or surface. While the concept of non-contact measurement technology has existed for many years, more recent advancements in non-contact temperature sensing and the evolution of the pyrometer have allowed temperature measurement at a distance to become popular throughout industrial process operations.

Pyrometers can commonly concentrate light from an object onto a temperature sensing element. The sensed elevation in temperature is proportional to the infrared optical energy. Different instruments may have varying arrangements of concentrating lenses and sensors, but the operating principle is the same. The physical law behind the pyrometer's operating principle operates on an exponential mathematical basis that is non-linear. This results in one of the limitations of the pyrometer. A single pyrometer can only, with high accuracy, deliver a comparatively narrow range of target temperature. If the need for accuracy is reduced, the applicable temperature range widens. Innovative manufacturers have developed instruments with technology and features overcoming many of the limitations imposed by the physics, delivering instruments with accuracy and applicable temperature range usable in a wide array of applications.

One of the advantages to using a non-contact pyrometer is that their calibration is independent of the distance between the sensor and the object being evaluated. This phenomenon is due to the fact pyrometers have a field of view and can be filled with the target object in a way independent of distance. While the radiation emanating from the target object may be decreasing, the field of view of the pyrometer is measuring a greater portion of the object which is proportional to the amount of radiation being lost, essentially canceling out the distance and allowing the pyrometer to provide useful output. An example of a practical application of a pyrometer in industry would be its use to check the temperature of a ventilation system in the HVAC field.

Share your temperature measurement requirements and challenges with process instrumentation specialists. Their product application expertise will combine with your own process knowledge and experience to produce an effective solution.

Electric Process Heaters & Controls

Hotfoil specializes in electric surface heating systems for fly ash hoppers on electrostatic precipitators or baghouses, coal and material handling systems, tanks, pipes, etc. in all types of industry.

For more information, visit http://www.hotfoilehs.com or call 609.588.0900.

Fuel Based Furnace Types and Applications

Large furnace
Large furnace in production (Hotfoil-EHS)
With fuel-based systems, heat is generated by the combustion of solid, liquid, or gaseous fuel, and transferred either directly or indirectly to the material. The combustion gases can be either in contact with the material (direct heating), or be con ned and thus be separated from the material (indirect heating, e.g., radiant burner tube, retort, muffle). Examples of fuel-based process heating equipment include furnaces, ovens, kilns, lehrs, and melters.

Fuel-based process heating systems are common in nearly every industry segment, and include furnaces like ovens, heaters, kilns, and melters, but also the surface treatment in ambient air. Typical fuel-based furnaces include the following:

  • Atmosphere generators. Used to prepare and/or condition protective atmospheres. Processes include the manufacture of endothermic gas used primarily to protect steel and iron during processing, and exothermic gas used to protect metals, but also to purge oxygen or volatile gases from con ned areas.
  • Blast furnaces. Furnaces that burn solid fuel with a blast of air, often used to smelt ore.
  • Crucible furnaces. A furnace in which the heated materials are held in a refractory vessel for processes such as melting or calcining.
  • Dryer. A device that removes free water, or other volatile components, from materials through direct or indirect heating. Dryers can be grouped into several categories based on factors such as continuous versus batch operation, type of material handling system, or source of heat generation.
  • Indirect process heaters. Used to indirectly heat a variety of materials by remotely heating and circulating a heat transfer uid.
  • Kilns. A furnace used to bake, dry, and re ceramic ware or wood. Kilns are also used for
    Heat treating furnace (Hotfoil-EHS)
    calcining ores.
  • Lehrs. An enclosed oven or furnace used for annealing, or other forms of heat treatment, particularly in glass manufacturing. Lehrs may be the open type (in which the flame comes in contact with the ware), or the muffle type.
  • Muffle furnaces. A furnace in which heat is applied to the outside of a refractory chamber or another enclosure containing the heated material that is enveloped by the hot gases. The heat must reach the charge by flowing through the walls of the container.
  • Ovens. A furnace-like chamber in which substances are heated for purposes, such as baking, annealing, curing, and drying. Heated systems can use forced convection or infrared.
  • Radiant-tube heat-treating furnaces. Used for processing iron, steel, and aluminum under a controlled atmosphere. The flame is contained within tubes that radiate heat to the work. Processes include carburizing, hardening, carbo-nitriding, and austempering. The atmosphere may be inert, reducing, or oxidizing.
  • Reverberatory furnaces. Furnaces in which open flames heat the upper portion of a chamber (crown). Heat is transferred to the material mainly by radiation ( flame, reflection of the flame by the crown) and convection (combustion gases).
  • Salt bath furnaces. Metal pot furnaces filled with molten salt where heat is applied to the outside of the pot or inside of the pot by radiant tube. Salt bath furnaces are used for processes such as heat treating metals and curing plastics and rubber.
  • Solid waste incinerators. Used to dispose of solid waste material through burning.
  • Thermal oxidizers. Used to oxidize volatile organic compounds (VOC) in various industrial waste streams. Processes include paint and polymer curing and/or drying.